458 pieces. Endless combinations.
Build a tower. Roll a story.

Design your own 3D-printable dice tower

Customise screw-together pieces in your browser, download 3MF or STL files and print without supports — your first 3 towers are free.

Design yours, free ↗Explore the towers ↓
No install3 free towersDice holder includedNo supports needed

458 pieces. Every one checked for supports.

01 / How it works

How it works

No CAD experience required.
Just a printer and a little imagination.

Wizard's Keep starting designA little inspiration
01

Pick a tower

Pick one of ten finished towers, or roll a random design.

A customisable gothic wall moduleHundreds of possibilities
02

Customise the pieces

Swap walls, doors, crowns and trays. Add a level. Pick your colours.

Elven Spire 3D model3MF + STL downloads
03

Download and print

Download your files, print without supports and screw the pieces together.

A dice holder pulled apart: a lid on top, a stone wall piece in the middle, and a plug cap at the bottom with three dice sitting in it Lid Any wall piece Plug cap
Included with every tower

Dice holders that fit every tower

Roll your dice through the tower, then put them away in a matching jar. It's a wall piece in the same style as your tower, with a cap screwed on each end.

  1. Print one more wall piecein any style, or the same as your tower.
  2. Add the plug and lidboth caps are always free to download.
  3. Screw them onsame thread as the tower, so a full set of dice stays put.
Make my dice holder
02 / Why make it yourself?

Custom dice towers made for your printer

Make something with character.
Change it whenever inspiration strikes.

Patchwork Keep with mixed walls

One thread. A whole world.

Every piece uses the same screw thread. Mix styles, swap the crown, build a little higher.

Crystal Sanctum tower render

Made for your printer

Support-free pieces that fit a 256 mm bed. Download 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer, or STL for your favourite slicer.

Gothic dice holder in Elven Spire cyan

Keep the dice, too

Add a plug and a lid to turn a wall piece into a dice jar. Storage caps are always free.

03 / Start here

Choose a dice tower to customise

Ten starting points. Your next adventure.
Open any tower and change everything.

Ten signature dice towers / Explore the collection

Find your starting design

04 / The parts library

Explore twenty dice tower wall styles

Twenty wall styles, from ancient bark to gothic stone. Explore a style in the designer.

05 / The best of the collection

Dice tower and holder gallery

Our favourite towers, each with its matching dice holder.
These are 3D renders of the files you download.

Support-freeLayer-by-layer checksOne shared threadMix every wall styleYours to customiseColour, height, doors & more
Pricing

Pricing

Your first 3 towers are free, with every style and option. Prices in Australian dollars, GST included. 14-day no-questions refunds.

Already bought? Open the designer and paste your license key when it asks.

Questions

FAQ

What counts as one of my 3 free towers?

One tower design. Download all of its pieces, or download it again later, and it still counts once. Storage caps and fit-test rings are always free.

What's the difference between Standard and Fine detail?

Standard files print great at arm's length and are what the free plan downloads. Fine detail keeps every chisel mark and stone edge, for close-up display pieces; it comes with Maker, Pro, Founder and the Tower Pass.

Monthly, yearly or lifetime?

Yearly saves a third over monthly. Founder is a one-off payment for everything in Pro, forever, and is only offered to the first 100 makers. If you only need one tower, the 30-day Tower Pass is cheapest.

Do I need supports?

No. Every piece is designed to print without supports, and each one is checked layer by layer for overhangs and floating parts before it's offered.

Which printers does it work with?

Any printer with a bed of about 200 mm or more. The largest piece is about 190 mm. Files come as 3MF (Bambu Studio, OrcaSlicer, PrusaSlicer) or STL (everything else).

What file formats do I get?

Download 3MF files for Bambu Studio, OrcaSlicer or PrusaSlicer, or STL files for other slicers. Free towers use Standard detail; paid plans include Fine detail.

How do the pieces join?

Every piece has the same 75 mm screw thread. Screw them together clockwise and the windows, door and stairs line up. Print the free fit-test rings first if you're on a new printer or filament.

How much filament does a tower use?

A four-piece tower is usually 250 to 400 g of PLA at 15% infill. The designer shows an estimate as you build.

Can I sell what I print?

Yes, on Pro, Founder or during a Tower Pass. Free and Maker are for personal use: print for yourself, your table and gifts. The Licences page has the details.

Can I cancel?

Any time, from the link in your receipt. You keep everything you downloaded. The Tower Pass ends by itself after 30 days.

Can I get a refund?

Yes: 14-day no-questions refunds on every payment, renewals included. Email nostalgiacreativeco@gmail.com or message us on Instagram. See the Refund & return policy.

How do I get in touch?

Send Nostalgia Creative Co. a message on Instagram (@nostalgia.creative.co) or email nostalgiacreativeco@gmail.com.

The monthly email

New towers in your inbox, once a month

  • A new wall style or crown, first
  • A free subscriber-only piece to print
  • Printing tips and the tower of the month
  • Member offers, like founder spots before anyone else

Design a dice tower for your table

Design it in minutes. Your first three are on us.

Start designing →